Turned out well some over spray to clear up but the shape is there woot. Boy was that complicated to work out. Any one looking to torture themselves eyes rule of thumb 2/3rd white to 1/3rd red and a billion masking triangles!
Friday, 25 April 2014
Mind bending triangles!
Holy inverted 3D geometric patterns batman after an morning working on this I need to give my eyes a rest.
Turned out well some over spray to clear up but the shape is there woot. Boy was that complicated to work out. Any one looking to torture themselves eyes rule of thumb 2/3rd white to 1/3rd red and a billion masking triangles!
Turned out well some over spray to clear up but the shape is there woot. Boy was that complicated to work out. Any one looking to torture themselves eyes rule of thumb 2/3rd white to 1/3rd red and a billion masking triangles!
Sunday, 20 April 2014
Slowly slowy
Creeping towards completion
As you can see I been making 2 centurions at the same time hence the slowness of progression. The reason being to get all the messy stuff don't together. Ones for me and ones for PGI at this poing mine takes a back seat at this point while I paint PGI's and I'll paint mine at the same time as I paint my dragon since they will share the guards scheme.
I still have to fabricate rails for the knees, rear shins and aerial for the back of the head. Its a bit of soldering something new to me to master.
Lots of people asking to buy these. If I have some resin lefty over rather than let it go to waste I'll use it up and make some extras, however all that will wait until PGIs work done and real life allows. They'll probably go on eBay because they wont be a huge production run.
As you can see I been making 2 centurions at the same time hence the slowness of progression. The reason being to get all the messy stuff don't together. Ones for me and ones for PGI at this poing mine takes a back seat at this point while I paint PGI's and I'll paint mine at the same time as I paint my dragon since they will share the guards scheme.
I still have to fabricate rails for the knees, rear shins and aerial for the back of the head. Its a bit of soldering something new to me to master.
Lots of people asking to buy these. If I have some resin lefty over rather than let it go to waste I'll use it up and make some extras, however all that will wait until PGIs work done and real life allows. They'll probably go on eBay because they wont be a huge production run.
Sunday, 13 April 2014
Centurion progress
I've reached the base coating stage thought I would share. I lost a few days because of a moment of carelessness, I knocked a leg off the table and the fin broke with the chipped peace vanishing so I had to unstick the thigh and cast a new one.
Its just balancing on its self here but i wanted to see how it all sat together I'm going to leave the missile doors till the very end because I know they get broken other wise. I still have a wash with a brush some black into the recesses which the spray can couldn't reach to get a good cranvas to start with.
There's a lot of weight hanging off the fore arm you can glue the arm of you don't want it to drop but i like a bit of movement so I've added a magnet to the elbow joint which hold the fore arm up but still allows it to move down.
Subscribe to:
Posts (Atom)